Model

3792-01

3792-03

Sampling Air Flow

2.83 l/min

1 l/min

Sensitivity

0.2 μm, 0.3 μm

0.2 μm, 0.3 μm

Condensation Range

1,000,000 pieces／cf

3,000,000 pieces／cf

Output

Type A

RS-485 Output

Connector Type RS-485 IN　   Modular Connector 8-pin (rear panel)

                        RS-485 OUT   Modular Connector 8-pin(rear panel)

Transmission Setting:  DIP switch 8-pin(front panel)

Address Setting(0-999):  Rotary DIP switch, 10 positions x 3 (front panel)

Multiplexer Output

Connector Type:  BNC Connector

Type B

4-20mAOutput

Output:  Data for 2 particle size ranges and Sensor Status

　 　Connector Type:  D-sub Connector 9-pin (rear panel)

　 　Indicative Resolution:  1/1000 of the full scale

　 　Full Scale:  3 levels (100、10,000、1,000,000 pieces / cf)

　 　Full Scale Selection:  Sliding DIP switch 8-pin(front panel)

Multiplexer Output

Connector type: BNC Connector

Display

5-Digit LCD

Optional Display unit available (needs to be exchanged with the supporting casing)

Condensation Display（Running Average for pre-set time）

SIZE key gives selection of Particle size range to monitor

Status LED

PARTICLE: Turn Red when picking the signal of the particle

STATUS:   Keep Green when Optics are operating normally.

FLOW:　　 Turn Green when Sampling Flow rate is normal

Power Supply

AC 100V−240V

Dimensions

4.6” x 5.3” x 6.7”    (118×135×170 mm)

(Excluding sampling air nozzle on the upper surface and other interface outfit.　

Also excludes rubber feet.)

Weight

Approx. 6.6lbs  (Approx. 3kg)