ANEMOMASTER ANEMOMETER MODEL 6006Request Quote
Best value anemometer on the market today
- Palm size and feather weight is standard on this must-have quick-check instrument
- Single button multi-function toggle switch for easy one-hand operation
- Read temperature and hold reading to easily record data on a worksheet
- ±5% of READING accuracy
- Broad measurement range
- Temperature compensation circuit for high accuracy
- Display readings in both metric and imperial units
- Compact and lightweight
- Averages measurements over one or five seconds for air velocity
*Annual NIST TRACEABLE CALIBRATIONS are performed at our facility in ANDOVER, NJ
|Range||0.01 m/s to 20.0 m/s (2 FPM to 3940 FPM)|
|Accuracy||+/- 5% of READING or +/- 0.015 m/s whichever is greater|
|Resolution||0.01 m/s (@ 0.01 to 9.99 m/s)
0.1 m/sec (@10.0 to 20.0 m/s)
|Response Time||Less than 1 second at 196 fpm (1m/sec), 90% response|
|Accuracy||+/- 1°F (+/- 0.5 °C)|
|Resolution||0.2 F (0.1 C)|
|Response Time||Less than 30 seconds at 196 fpm (1 m/sec), 90% response|
|Power Supply||4 x AA batteries|
|Operaing Environment||Main unit 41 to 104°F (5 to 40°C)
Probe -4 to 158°F (-20 to 70°C)
|Storage Environment||14 to 122°F (-10 to 50°C)|
|Dimensions||Main unit 2.4″(60mm) x 4.7″(120mm) x 1.2″(30mm)
Probe: 0.24″ or 0.40″(6 or 10mm) diameter x 7.9″(200mm) length.
Probe cable: 0.13″(3.3mm) diameter x 59″(1,500mm) length.
|Weight||0.4 lbs (180 g)|
|What’s Included||Operation Manual, AA Batteries, Extension Rod, Carrying Case, NIST Certificate|
Our anemometers are hot-wire (thermal) anemometers. Basically, it measures the air speed by calculating how fast the sensor is being cooled by the air.
The principles behind all hot-wire anemometers may be the same, but the quality varies. Simply put, with our temperature compensation sensor, our Climomaster is the most accurate with an accuracy of +/- 2%. This is due to several factors:
1) We calibrate the temperature compensation sensor, as well as the velocity sensor. Other manufacturers only calibrate the velocity sensor.
2)We use special high-quality materials, like our platinum sensors, that increase accuracy.
3) Our manufacturing facility uses not 1, but 4 specialized wind tunnels to test and calibrate our anemometers. These wind tunnels include a low velocity tunnel, high tunnel velocity and a variable temperature wind tunnel.
4) We’ve been making anemometers for over 80 years. During that time we’ve perfected our knowledge and refined our manufacturing process to produce a research-grade instrument.
Yes, all our instruments come with a calibration certificate.
Annual calibration is recommended to ensure accuracy. However, this can vary based on how often the anemometer is used and the environments it’s used in. Also, some companies have an SOP in place that specifies how often the instrument will need to be serviced. More specifically, regulatory compliances may dictate the calibration interval.
You can measure clean air between -4 and 158°F (-20 to 70°C) in an environment with no visible condensation. (Please note: the temperature range given is for the probes)
No, these are thermal anemometers that generate heat when in operation; if you expose them to a flammable gas it could cause a fire or explosion. Corrosive or caustic gases, such a chlorine, will damage the sensor on contact. While it is possible to use the instrument in a non-flammable, non-caustic gases the instrument is not calibrated for these gases and it will not measure airflow accurately.
The unit ships in a hard carrying case and includes extension rod, 4 x AA batteries, and a NIST traceable calibration certificate.
Give us a call! Our customer service team is happy to discuss your application and find a solution that works for you. We won’t sell you a product that doesn’t meet your needs.