GAS MONITOR 2700 SERIES
Request QuoteMODEL 2710 / 2750 GASMASTER GAS MONITORS
Product Features
- The portable gas detectors can be configured with a wide range of single or multi-gas sensor heads
- Each sensor head is simply plugged into the detector to begin monitoring
- The detector does not require additional configuration, allowing sensor heads to be swapped out easily in the field
- Sensor heads come with a NIST TRACEABLE CALIBRATION certificate
- Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb
- Unit comes with a self calibration ZERO out feature
- The monitor is compatible with a full range of gas sensors
- The optional remote sensor head adaptor kit allows the sensor head to be located up to 46 ft away
- The 2750 GASMASTER features on-board alarm, data logging, software interface, and an analog output
- The basic monitor, the 2710 GASMASTER will display minimum, maximum and average readings and is designed for short term indoor measurements
- Measures a wide range of common indoor air pollutants
- Interchangeable sensor heads capable of measuring more than 20 types of toxic gases
- Accurate and reliable measurements
- Alarm and Analog output available
- IAQ Investigation
- Industrial Hygiene Quality Control
- Occupational Safety and Health Testing
- US GBC LEED certification
| General Specifications | |
| Measurements Units | ppm or mg/m3 |
| Sensor Head | Removable and Replaceable |
| Output | 0 to 5 V, Alarm output |
| Data Logging | 8188 data points |
| Power Supply | Li-Ion Battery or AC Adapter |
| Dimensions (with sensor head) | 7.0 x 4.75 x 2.0 inches (195 x 122 x 54 mm) |
| Weight (with sensor & battery) | 1 lbs (460 g) |
| Standards | CE-mark Part 15 of FCC Rules EN 50082-1: 1997 EN 50081-1: 1992 |
| Warranty | 1 year |
| What’s Included | Meter, Li-ion battery pack, Operation manual, AC adapter, PC connection cable, Data processing software |
| Sensor | Range (ppm) | Accuracy of Calibration | Min. Detection Limit (ppm) | Resolution (ppm) | Operational Temperature Range | Operational RH Range | |
| Ammonia | 0-100 | <±10% | 0.2 | 0.1 | 32-104°F | 10-90% | |
| Ammonia (leak) | 0-1000 | <±15% | 2 | 1 | 32-104°F | 10-90% | |
| Carbon Monoxide | 0-25 | <±0.5 ppm 0-5 ppm; | 0.05 | 0.01 | 32-104°F | 10-90% | |
| <±10% 5-25 ppm | |||||||
| Carbon Monoxide | 0-100 | <±1 ppm 0-10 ppm; | 0.2 | 0.1 | 32-104°F | 10-90% | |
| <±10% 10-100 ppm | |||||||
| Carbon Monoxide | 0-1000 | <±10% | 1 | 1 | 32-104°F | 10-90% | |
| Carbon Dioxide | 0-2000 | <±10 ppm +5% | 10 | 1 | 32-104°F | 10-90% | |
| Carbon Dioxide | 0-5000 | <±20 ppm +5% | 20 | 1 | 32-104°F | 10-90% | |
| Chlorine | 0-10 | <±10% | 0.02 | 0.01 | 32-104°F | 10-90% | |
| Formaldehyde | 0-10 | <±0.05 ppm 0-0.5 ppm; | 0.01 | 0.01 | 32-104°F | 10-90% | |
| <±10% 0.5-10 ppm | |||||||
| Hydrogen | 0-5000 | <±10% | 5 | 1 | 32-104°F | 10-90% | |
| Hydrogen Sulphide | 0-10 | <±0.05 ppm 0-0.5 ppm; | 0.04 | 0.01 | 32-104°F | 10-90% | |
| <±10% 0.5-10 ppm | |||||||
| Hydrogen Sulphide | 0-100 | <±0.5 ppm 0-5 ppm; | 0.4 | 0.1 | 32-104°F | 10-90% | |
| <±10% 5-100 ppm | |||||||
| Methane | 0-10000 | <±15% | 10 | 1 | 32-104°F | 10-90% | |
| Nitrogen Dioxide | 0-1 | <±0.02 ppm 0-0.2 ppm; | 0.005 | 0.001 | 32-104°F | 10-90% | |
| <±10% 0.2-1 ppm | |||||||
| Ozone | 0-0.15 | <±0.005 ppm | 0.001 | 0.001 | 32-104°F | 10-90% | |
| Ozone | 0-0.5 | <±0.008 ppm 0-0.1 ppm; | 0.001 | 0.001 | 32-104°F | 10-90% | |
| <±10% 0.1-0.5 ppm | |||||||
| Ozone | 0-10 | <±0.1 ppm 0-1 ppm; | 0.02 | 0.01 | 32-104°F | 10-90% | |
| 15% 1-10 ppm | |||||||
| Perchloroethylene | 0-200 | <±5 ppm 0-50 ppm; | 1 | 1 | 32-104°F | 10-90% | |
| <±10% 50-200 ppm | |||||||
| Sulphur Dioxide | 0-10 | <±0.05 ppm 0-0.5 ppm; | 0.04 | 0.01 | 32-104°F | 10-90% | |
| <±10% 0.5-10 ppm | |||||||
| Sulphur Dioxide | 0-100 | <±0.5 ppm 0-5 ppm; | 0.4 | 0.1 | 32-104°F | 10-90% | |
| <±10% 5-100 ppm | |||||||
| VOC (GSS sensor) | 0-25 | <±10% | 0.1 | 0.1 | 32-104°F | 10-90% | |
| VOC (GSS sensor) | 0-500 | <±10% | 1 | 1 | 32-104°F | 10-90% | |
| VOC (PID sensor) | 0-20 | <±10% | 0.02 | 0.01 | 32-104°F | 10-90% | |
| VOC (PID sensor) | 0-1000 | <±10% | 0.2 | 0.1 | 32-104°F | 10-90% | |
| Temperature | -20-100°C | <± 0.3°C | 0.01°C | -40-248°F | 0-105% | ||
| Humidity | 0 to 100% | <± 2% RH | 1% RH | -40-248°F | 0-105% | ||
| Sensor | Gases | Range (ppm) | Accuracy of Calibration | Min. Detection Limit (ppm) | Resolution (ppm) | Operational Temperature Range | Operational RH Range |
| MS1 | CO | 0-2000 | <±10 ppm +5% | 10 | 1 | 32-104°F | 10-90% |
| CO2 | 0-100 | <±10% 1-100 ppm | 0.2 | 0.1 | |||
| MS2 | CO | 0-2000 | <±10 ppm +5% | 10 | 1 | 32-104°F | 10-90% |
| CO2 | 0-100 | <±10% 1-100 ppm | 0.2 | 0.1 | |||
| VOC | 0-20 | <±10% | 0.02 | 0.01 |
- User Manual
- Data Sheet(English)
- Data Sheet(Spanish)
- Gas Sensor Heads List
- Indoor Sterilization and Purification
- OZONE Monitor Pharmaceutical Applications
- Gasmaster Software installer (.exe file)
Our portable gas detectors are designed for easy and affordable measurement of indoor and industrial air quality. Indoor air quality consultants
They are used by health and safety experts at industrial and commercial sites as well as researchers who are interested in measuring hot spots and testing personal exposure to harmful indoor gases.
